Before you start to program your remote control, make sure your TV is switched on.
button until the red TV light on your remote flashes, as shown in
the picture on the right.
Press and hold the
Refer to the table on the right. Enter the code for your TV brand.
The light will flash twice.
* Selecting "Other" will search for all other TV brands and may take up to 15 minutes to generate codes.
Press and hold the
finger from the
. The red TV light will flash twice.
button again to switch your TV back on.
button until the green OPTIK light is illuminated at the top
of your remote.
That's all there is to it. Now, you can turn your TV and digital box on and off
simultaneously by pressing the
DVD, BluRay and Audio Auxiliary Devices
To learn how to program your remote to control these devices,
please visit telus.com/programtvdevices.
Quick tips
a. Tap to go back. b. Press and hold to exit.
If you're using Xbox 360
to control it. To control your Xbox 360
Congratulations – you're done!
Troubleshooting:
If the programming does not work properly,
please refer to the FAQ's at telus.com/remotefaq.
© 2012 TELUS. 08/12
button for 3 seconds, until the TV light flashes twice.
button. When your TV switches off, remove your
button on your remote.
as a set top box, your remote has been pre-programmed
, make sure you are in AUX mode.